OSHA Region 1 & 2 · NY · NJ · MA · CT · RI · NH · VT · ME · PAsafety@safetynortheast.com

Compliance · State statutes

Northeast State Public-Works OSHA 10 Statutes (MA, NY, CT, RI, NH)

Five Northeast states write OSHA 10-Hour Construction training into public-works law. The triggers, proof requirements and penalties differ, and getting one wrong can take a crew off a site mid-pour.

Published 2026-11-21 · Sources cited under each table

Statute matrix

Each of these laws requires OSHA 10-Hour Construction training, issued as a Department of Labor card by an OSHA-authorized outreach trainer. A General Industry card does not satisfy them.

StateStatuteTriggerProof & enforcement
MassachusettsM.G.L. c. 30, § 39SPublic works and public building contracts (covered public construction above the statutory bid threshold, commonly over $10,000)Proof submitted with certified payroll; uncertified workers subject to immediate removal from site
New York StateLabor Law § 220-hPublic work contracts of $250,000 or moreTraining completed before performing work; proof attached to the first certified payroll
ConnecticutC.G.S. § 31-53bPublic works contracts meeting the § 31-53 prevailing-wage thresholdsCards accompany certified payroll to the contracting agency; currency enforced under CT rules
Rhode IslandR.I. Gen. Laws § 28-20-35 / § 37-23-1State and municipal construction projects of $100,000 or moreCard carried on the worker's person at all times on site; fines by RI Dept. of Labor & Training
New HampshireRSA 277:5-aPublic works and public building contracts of $100,000 or moreTraining before work begins; civil penalties up to $2,500 plus daily fines per employee, and removal

Massachusetts General Laws c. 30 § 39S; NY Labor Law § 220-h; Conn. Gen. Stat. § 31-53b; R.I. Gen. Laws §§ 28-20-35, 37-23-1; N.H. RSA 277:5-a.

Massachusetts: M.G.L. c. 30, § 39S

Massachusetts applies the requirement broadly across public works and public building construction. Every employee on site must have completed an OSHA 10-Hour Construction course, and the contractor submits proof with certified payroll. A worker who cannot show a card can be removed from the job immediately, which in practice means the foreman loses a hand until the card is produced.

Budget note. Under the Workforce Training Fund Program (WTFP) Express rules, legally mandated standalone OSHA compliance courses are generally excluded from grant reimbursement. Plan OSHA 10 and 30 as a direct project cost rather than counting on Express funding.

New York State: Labor Law § 220-h

On public work contracts of $250,000 or more, every laborer, worker and mechanic must complete OSHA 10-Hour Construction before performing work. Proof is attached to the first certified payroll, so a missing card shows up on the paperwork the agency reviews, not just on site.

Inside the five boroughs, NYC Local Law 196 adds Site Safety Training on top of state law for covered sites. See the Local Law 196 guide.

Connecticut: C.G.S. § 31-53b

Connecticut ties the requirement to public works projects that meet the prevailing-wage thresholds of § 31-53. Workers must hold an OSHA 10-Hour Construction completion card, and copies accompany the certified payroll submitted to the contracting agency. Contractors should also confirm card currency under Connecticut's rules when crews carry older cards.

Rhode Island: § 37-23-1 and § 28-20-35

Rhode Island applies to state and municipal construction projects of $100,000 or more, and is the only state on this list that requires the worker to carry the card on their person while on site. A card in the office file does not count. The RI Department of Labor and Training enforces with fines.

New Hampshire: RSA 277:5-a

New Hampshire requires OSHA 10-Hour Construction for all on-site employees on public works and public building contracts of $100,000 or more, completed before work begins. The NH Department of Labor can impose civil penalties of up to $2,500 plus daily fines per non-compliant employee, and remove workers from the site.

New Jersey, Pennsylvania, Maine & Vermont

These states do not have a general statewide OSHA-10 mandate for public works comparable to the five above. Training requirements on their projects usually arrive through other routes:

  • Owner and agency specifications. Transit, port, turnpike and university owners often write OSHA 10 or 30 into the general conditions.
  • GC contracts. Tier-1 general contractors in the Northeast commonly require OSHA 10 for all workers and OSHA 30 for foremen on every project, public or private.
  • Prevailing-wage and local rules. Municipal ordinances and project labor agreements can add training requirements; read the bid documents.

Federal OSHA standards under 29 CFR 1926 apply in all four states regardless.

Bid-day checklist for public work

  • Identify the state and the trigger: owner type, contract value, prevailing-wage status.
  • Confirm the card type is OSHA 10-Hour Construction and that every worker's card is issued and not just "course completed".
  • Plan for subcontractors' crews; most statutes apply to every worker on site, not only your own.
  • Build the card copies into the certified payroll workflow (MA, NY, CT).
  • In Rhode Island, tell crews to carry the physical or digital card on site every day.
  • Price training into the bid: a private on-site class runs $1,000–$2,500 per session; open enrollment runs $150–$250 per worker.
See which mandates your project triggers

The estimator checks state, owner type and contract value and prices the training.

Open the estimator

Need cards for a crew before mobilization? See on-site OSHA 10 & 30 training.

Mobilization, training & audits

Have a start date, a bid deadline or an inspection coming?

Send the project details. We reply with scope questions or a written proposal for staffing, crew training, written programs or a mock audit.