Federal OSHA penalty schedule
| Violation type | Maximum penalty | Basis |
|---|---|---|
| Serious | $16,550 per violation | Substantial probability of death or serious harm, and the employer knew or should have known |
| Other-than-serious | $16,550 per violation | Directly related to safety and health but unlikely to cause death or serious harm |
| Posting requirements | $16,550 per violation | OSHA poster, 300A summary, citation posting |
| Failure to abate | $16,550 per day | Each day beyond the abatement date |
| Willful or repeated | $165,514 per violation | Intentional disregard or plain indifference, or a substantially similar violation cited within five years |
29 CFR 1903.15(d), OSHA civil penalty amounts.
Why the 2026 amounts did not rise
OSHA's maximums are normally adjusted each January for inflation using the October CPI-U. The federal funding lapse interrupted publication of the October CPI-U figure, and the annual adjustment was not made. The maximums above therefore remain in force; budget against them until OSHA publishes a new schedule.
How assessed penalties are reduced
The figures above are ceilings. OSHA's Area Office starts from a gravity-based amount and can reduce it for:
- Size. Smaller employers receive larger percentage reductions.
- Good faith. A written, implemented safety and health program can earn a reduction.
- History. No serious, willful or repeat citations in the past five years.
Reductions are not available for willful violations in the same way, and a repeat classification can follow a contractor across sites for five years.
Top 10 most cited standards, FY 2025 vs. FY 2026
| Rank | FY 2025 | FY 2026 |
|---|---|---|
| 1 | Fall Protection – General Requirements 1926.501 | Fall Protection – General Requirements 1926.501 |
| 2 | Hazard Communication 1910.1200 | Hazard Communication 1910.1200 |
| 3 | Ladders 1926.1053 | Lockout/Tagout 1910.147 |
| 4 | Lockout/Tagout 1910.147 | Scaffolding 1926.451 |
| 5 | Respiratory Protection 1910.134 | Ladders 1926.1053 |
| 6 | Fall Protection – Training 1926.503 | Respiratory Protection 1910.134 |
| 7 | Scaffolding 1926.451 | Powered Industrial Trucks 1910.178 |
| 8 | Powered Industrial Trucks 1910.178 | Fall Protection – Training 1926.503 |
| 9 | Eye and Face Protection 1926.102 | Eye and Face Protection 1926.102 |
| 10 | Machine Guarding 1910.212 | Machine Guarding 1910.212 |
OSHA, Top 10 Most Frequently Cited Standards, FY 2025 and FY 2026.
Six of the ten are construction standards. Fall protection appears twice (general requirements and training), which is why a fall-protection competent person on site pays back faster than almost any other control.
Field controls for Northeast contractors
| Standard | What usually gets cited | Control that prevents it |
|---|---|---|
1926.501 | Unprotected edges and floor openings at 6 ft or more; roofing without PFAS | Perimeter guardrail plan per floor, hole-cover program, daily competent-person check |
1910.1200 | No written program, missing SDSs, unlabeled secondary containers | Site HazCom binder or digital SDS access, label kit for each gang box |
1910.147 | No energy control procedures or periodic inspection | Machine-specific procedures, annual inspection records, authorized-employee training |
1926.451 | Incomplete planking, missing guardrails, no safe access | Scaffold tag system and competent-person inspection before each shift |
1926.1053 | Ladder not extending 3 ft above landing; standing on top step | Ladder inspection and replacement policy; ladder-last planning |
1926.503 | No written certification of fall protection training | Signed training certificates kept on site |
After a citation
- Post the citation at or near the place of each violation for three working days or until corrected, whichever is longer.
- Decide within 15 working days whether to request an informal conference or file a notice of contest.
- Abate by the date on the citation and certify abatement to OSHA with evidence.
- Review whether the same condition exists on your other sites; a repeat classification carries the $165,514 maximum.
A mock inspection walks your site against this Top 10 list.
Compare the cost of compliance with a citation in the compliance & budget estimator.